APPLICATION AREA
Atracto can be applied to all interior walls, plaster coatings, rough concrete, and wooden surfaces, in conjunction with the appropriate primer, following surface preparation.
-Atracto leads a bright decorative appearance of the metallic pigments it incorporates.
-The vivid and bright pigments deliver a delightful shine to the surface.
-Due to its remarkable water vapor permeability, it provides the removal of water vapor, enabling the surface to breathe.
-Atracto is water-based, it has no harm for human health and the environment.
-Atracto has perfumed feature, it provides a pleasant smell for the application environments.
BuyCOLORS
Atracto is an acrylic emulsion-based decorative coating containing metallic pigments, with a silky, gold and silver pearlescent finish.
All Colors
After thoroughly removing any dirt, grease, blistered paint, and dust from the application surface, proceed to rectify surface defects using San Deco Acrylic Putty Interior, followed by an application of San Deco Decoprimer as an undercoat.
-Atracto should be thoroughly mixed to achieve homogeneity, without any dilution.
-For the first coat, apply Atracto a steel trowel or brush.
-The second coat can also be applied with a trowel or brush, allowing you to achieve the desired effect.
-Allow a minimum of 6 hours between each coat for proper drying.
-Ensure that the application environment remains within the temperature range of +5°C to +35°C during and within the 24 hours following the application.
Allow a period of 2-3 hours for the paint to become touch dry, and a full 24 hours for it to completely dry under standard environmental conditions at 23°C.
The coverage of the paint depends on factors such as surface smoothness, porosity, and the chosen application methods for a single coat:
For Atracto:
For Atracto Touch: