APPLICATION AREA
It is applied as a topcoat paint on decorative products following surface preparation, suitable for use on walls, plaster, coarse concrete, and timber surfaces.
– Gives a glittery appearance to the applied product.
– Easy to apply, does not change the texture and pattern of the product on which it is applied.
– It can be erased.
– Thanks to its high water vapor permeability, it allows the steam to be expelled and breath.
– As it is water-based, it has no harm to human health and environment.
– With its perfumed feature, it provides a pleasant smell for the application environments.
After thoroughly cleaning the application area to remove all dust, dirt, oil, and loose paint, surface irregularities should be rectified using San Deco Acrylic Putty Interior. Subsequently, an undercoat of San Deco Decoprimer should be applied.
When applying Decorative Finish to decorative paste and other putty-density decorative products, it is advisable to use a trowel or a special brush. However, when applying it to paint-type products, it is recommended to use a roller or a brush.
At a temperature of 23°C, the surface reaches touch-dry status in approximately 2-3 hours, while complete drying is achieved within 24 hours.
The consumption rate may vary based on surface smoothness, absorbency, application techniques, and the specific product used on the substrate. Theoretical consumption for a single coat is as follows: