Sandeco - Decosatin

Decosatin

APPLICATION AREA

Decosatin is suitable for application on properly prepared interior mineral surfaces such as rough plaster, concrete, cement sheets, plaster panels, and surfaces previously treated with an appropriate undercoat.

}
Decosatin

FEATURES

– It is easy to clean with its perfect wipe ability; it does not stain.

– Provides a semi-bright texture to the application surface.

– High covering ability.

– Highly vapour permeable, it enables the vapour to be thrown out and allows the surface to breathe.

– Water-based, scentless and harmless to human health and the environment.

ADDITIONAL FEATURES

Sandeco

After thoroughly cleaning the application surfaces to remove any dirt, oil, blistered paint, or dust, surface imperfections should be rectified using San Deco Acrylic Putty Interior. For surfaces that were previously painted or are heavily soiled, an undercoat of San Deco Uniprimer is recommended.

Sandeco

-Before applying, dilute Decosatin with a maximum of 5-10% fresh water and ensure thorough mixing for homogeneity.

-Apply two coats using a roller, brush, or a spraying method.

-Allow a minimum of 5 hours to pass before applying the second coat.

-Maintain an environment with a temperature between +5°C to +35°C for 24 hours during and after the application.

Sandeco

Allow 5-6 hours for touch dry and 24 hours for complete drying at a temperature of 23°C in the environment.

Sandeco

Depending on the surface smoothness, its porosity, and the application methods, for a single coat application:

  • 1 liter of paint covers an area of 13.5 – 18.5 m².
  • 1 kg of paint covers an area of 10.0 – 13.5 m².
  • The paint consumption for 1 m² area is 55-75 ml and 75-100 grams (g).