After removing all types of dirt, oil, blistered paint, and dust from the application surfaces, surface defects should be corrected with San Deco Acrylic Putty Interior. For surfaces with old paint or those ready to be painted, it is necessary to apply a coat of San Deco Uniprimer as an undercoat.

-Before application, Denplas should be thoroughly mixed by diluting it with a maximum of 20% fresh water.
-Apply 2 coats using a roller, brush, or spraying method, and wait for a minimum of 4 hours before applying the second layer.
-Maintain an environment for application with a temperature between +5°C and +35°C for 24 hours during and after the application.

Allow 4-5 hours for the paint to become touch dry and 24 hours for it to completely dry under 23°C environmental conditions.

Depending on the surface’s smoothness, porosity, and the application method, for a single coat application:

• 1 liter of paint covers an area of 11.5 – 15 m².
• 1 kg of paint covers an area of 7.5 – 9.0 m².
• The paint consumption for 1m² area is 70 – 85 ml and 110 – 135 grams (g).

TDS

• IP.011.ENG_DENPLAS_TDS_ENG.pdf

SDS

• DENPLAS_DEKA_BOYA_SDS_326015_Ver.3.0EN.pdf