Sandeco - Eşsiz Mekanlar

Acrogren

SCOPE OF APPLICATION

After cleaning all kinds of dirt, oil, blistered paint and dust from the application surfaces, surface defects should be corrected with SANDECO ACRYLIC PUTTY EXTERIOR.Previously painted surfaces or surfaces that will be painted must be undercoated with SAN DECO UNIPRIMER. We recommend using the same colour of undercoat as the selected siding colour.

Sandeco Uygulama Görseli

FEATURES

- Elastic, serving as a bridge for the cracks on the application surface, not being affected by the cracks that might occur due to building subsidence,

- Covers up the faults on the surface with the thick layer of film that forms during application,

- Resistant to alkaline,

- Not affected from external factors, and weather conditions like rain, snow, humid, extreme hot or cold , moreover its colours do not fade,

- Due its high vapor permeability, it allows surface to discharge the steam and breathe,

- As it is water-based, it is harmless to human health and environment.

COLORS

ACROGREN is an acrylic emulsion-based, elastic, long-lasting exterior coating with silicone additives.

Sandeco Colors

ALL COLORS

Sandeco Colors

ADDITIONAL FEATURES

Sandeco Surface

After cleaning all kinds of dirt, oil, blistered paint and dust from the application surfaces, surface defects should be corrected with SANDECO ACRYLIC PUTTY EXTERIOR.Previously painted surfaces or surfaces that will be painted must be undercoated with SAN DECO UNIPRIMER. We recommend using the same colour of undercoat as the selected siding colour.

Sandeco Surface

-ACROGREN is mixed homogenously without dilution.

-Then, product is applied as one coat with roller or spraying

-You may use a lambskin roller to achieve a different texture,

-The temperature of the application environment must be kept between +5°C and +35°C during application and for 24 hours afterwards.

Sandeco Surface

Allow 4-6 hours for touch dry and 24 hours for complete dry at 23oC environment conditions.

Sandeco Surface

Depending on the surface smoothness, porosity and application methods, for a single coat application;

- 1 lt covers 1,40 – 2,50 m² of surface,
- 1 kg covers 0,85– 1,50 m2 of surface,
- The paint consumption for 1 m2 area is 400 -715 ml and 675 - 1200 gr.