Cleaning the wall can be achieved without pressing with a dry cloth so as not to damage the surface, or by dusting the wall with dusting tassels. Sandecoshield can also be applied additionally to give surfaces low dirt holding properties. In case of need for cleaning in the future, you can clean the surface with a slightly damp cloth.
Although the application tools to be used in our effect group products varies according to the product, you can generally use special application tools that gives a roller brush steel or plastic trowel spatula pattern. You can use the technical bulletins of the relevant product for the correct use of the application tools on product basis.
It is possible to apply in two ways.
If your wallpaper is not a wallpaper that can be painted on: First of all, the wallpaper on the floor and the adhesive residues remaining from the wallpaper must be completely removed from the wall. You can paint according to the application instructions of the product to be applied after the surface to be applied is cleaned of all kinds of residues and dirt, corrected with San Deco Acrylic Interior Wall Putty and dried.
If your wallpaper is a paintable wallpaper: You can paint by following the application instructions of the paint product you will use.
In the finishing process, you can wipe the finish product with a damp sponge or damp cloth while it is wet before it dries. It is not possible to completely remove the color in deletion process, but its effect can be reduced for new color application.
Finishing can be preferred with the interior paint group, but with our San Deco Decorative Finish products, you can easily apply without changing the texture and pattern of the product.
Although it varies depending on the enviromental conditions and temperature, it may also vary according to the thickness of the product during application. Drying can take place between 24 and 48 hours in standard applications in an environment of 23˚C (drying times may be longer at higher relative humidity and low temperature)
The shelf life of the paints is between 2-3 years after ensuring the appropriate storage conditions (in an unopened package, in a cool and dry place, protected from frost and direct sunlight).
We have our Sandecoshield product with high water repellency, which can be applied on interior and exterior water-based top coat paints and decorative (effect) paints. With Sandecoshield product, you can use all our products in places that come into contact with water.
The retouching process may vary according to the products in the effect paint group. You can get detailed product-based technical information from +90 850 888 56 56 customer service or product technical documents.
San Deco adopts product and production policies that are sensitive to nature and do not harm human health. Our products do not cause any harm to health or the environment. All of our water-based products have low VOC (volatile organic component) ratio.
If paint or its derivatives are accidentally swallowed, do not try to induce vomiting in the patient, and immediately apply to the nearest hospital and health institution.
Since the micron thickness of the effect paints is higher than the paint, it may occur additionally, considering this issue during the applications, it is necessary to start and finish quickly with a large team. Whenever possible, the process should be continued without interruption so that one wall is completed.
First of all, moisture must be eliminated completely. It is not appropriate to paint on damp surfaces without solving the problem. It will be healthier to find the source of moisture (water-air, etc.) and to start the paint application after making an improvement with the right method.
We have TSE EN certificates in our related products in accordance with TS 5808 TS 7847 TS EN 13744 TS EN 1504-2 standards. You can find these documents on our website. All of our water-based paints have low VOC (volatile organic component) value and our company has ISO 9001 ISO 14001 and ISO 18001 integrated system certificates.
You can easily implement some of our easily applicable decorative products (Sandeco Art Atracto Arista Galaxy Cometa) and Functional product groups (Writewall Sandeco Magnetic San Deco Chalkboard San Deco Projector) in our product groups. In this regard, you can access product technical bulletins on our website and review application information. In some product applications, manual dexterity may require professionalism.
The desired paint application can be started by using transfer primer to repaint on the flat paint application. In the effect paint application, the desired paint application can be started by applying acrylic putty and primer on the floor using conversion primer after the sanding process.
There may be several reasons for this primarily;
Cleaning should not be attempted when the paint is wet, in this case, it may spread more and penetrate into the textile.
The A + Label is a statement that a product makes very low emissions indoors. Identifies products with emission classes (A + A B C) based on the results of VOC (Volatile Organic Compounds) emission tests according to the ISO 16000 standard series. A + means that it contains very low almost no hazardous volatile components. It is given to construction materials that contribute to a healthy living space in environmentally-friendly interiors (home, workplace, offices, schools, hospitals, etc.) against the harmful effects of building and decoration materials on health. This declaration is valid in all European countries with the ISO 16000 Indoor Air Quality Standard.