Effects Paints
Effects Paints
APPLICATION AREA
Proplas is applied to properly prepared interior mineral surfaces, including rough (black) plaster, concrete, cement sheet, plaster panel, and previously painted surfaces with the appropriate undercoat.
-It adheres perfectly to the surface without cracking.
-It provides excellent coverage and has a high level of whiteness.
-Thanks to its high water vapor permeability, it allows the expulsion of water vapor and enables the surface to breathe.
-Being water-based, it is scentless and environmentally friendly, not harmful to human health or the environment.
Clean the application surface by removing any dirt, oil, blistered paint, or dust. Correct any surface defects using San Deco Putty Interior. Apply an undercoat to previously painted or surfaces that will be painted using San Deco Uniprimer.
-Before applying, thoroughly mix Proplas by diluting it with a maximum of 20% fresh water to achieve homogeneity.
-Apply two coats using a roller, brush, or spraying method. Allow a minimum of 4 hours of drying time between coats.
-Maintain the application environment at a temperature between +5°C and +35°C during and for 24 hours after the application.
Allow 4-5 hours for the paint to become touch dry and 24 hours for it to completely dry under environmental conditions of 23°C.
Depending on the surface’s smoothness, porosity, and the application methods, for a single coat application:
