Sandeco - Sandeco Art / Art Velvet

Sandeco Art / Art Velvet

APPLICATION AREA

Sandeco Art is applied to interior building surfaces, including walls, plasters, exposed concrete, and wooden surfaces. Sandeco Art is used following proper surface preparation and with the application of a suitable undercoat.

}
Sandeco Art / Art Velvet
}
Sandeco Art / Art Velvet

FEATURES

-The inclusion of organic and inorganic pigments in its composition results in a vibrant, bright, and textured surface.

-Sandeco Art has elegant and decorative appearance is achieved through the incorporation of metallic pigments and special additives.

-High water vapor permeability enables the expulsion of water vapor and allows the surface to breathe.

-Being water-based, Sandeco Art has no harm to human health or the environment.

-Sandeco Art has scented feature enhances the ambiance of the application environment with a pleasant fragrance.

Sandeco E-Shop Buy

COLORS

Sandeco Art is an acrylic emulsion-based decorative coating with a pearlescent finish, containing metallic pigments like gold and silver. It provides a textured surface. SanDeco Art Velvet, while generally sharing the same properties, is a finer-grained and softer decorative material.

ALL COLORS

ALL COLORS

ALL COLORS

APPLICATION VIDEO

ADDITIONAL FEATURES

Sandeco

-Start by thoroughly cleaning the application surfaces to remove any dirt, oil, blistered paint, and dust.

-Correct any surface defects using San Deco Acriylic Putty Interior.

-For painted surfaces, apply a coat of San Deco Decoprimer as a primer.

Sandeco

  • After applying the undercoat, use a wooden brush to apply Sandeco Art / Sandeco Art Velvet without dilution.
  • While the product is still wet, create the desired patterns using circular or linear movements with the wooden brush.
  • When using Sandeco Art Velvet, in addition to the above steps, finalize the texture by gently shaving it with a plastic spatula before the product dries.
  • Maintain the temperature of the application environment within the range of +5°C to +35°C during application and for the subsequent 24 hours.

Sandeco

Allow a period of 2-3 hours for the paint to become touch dry, and a full 24 hours for it to completely dry under standard environmental conditions at 23°C.

Sandeco

For a single coat application, the coverage of the paint varies depending on factors such as surface smoothness, porosity, and the chosen application methods:

  • 1 liter covers an area ranging from 6.5 to 8.5 m².
  • 1 kilogram provides coverage for an area spanning from 5.0 to 6.5 m².
  • The paint consumption per 1m² area falls within the range of 120-160 milliliters (ml) and 150-200 grams (g).