Clean the application surface thoroughly by removing any dirt, oil, blistered paint, or dust. Additionally, address any surface defects if present.

-Before application, dilute Beton Contact with 40-45% water and ensure thorough mixing.

-Apply the product using a roller.

-Begin the plaster or gypsum application 24 hours after the application of Beton Contact.

-Maintain an environment with a temperature between +5°C and +35°C for 24 hours during and after the application.

Allow 5-6 hours for the paint to become touch dry, and wait for a full 24 hours for it to completely dry under 23˚C environmental conditions.

The paint consumption for a single coat application depends on surface smoothness, porosity, and application methods as follows:

• 1 liter covers an area of 5.5 – 11.0 m².
• 1 kilogram covers an area of 3.0 – 6.5 m².
• The paint consumption for 1m² area is 90 – 180 ml and 150 – 330 grams (gr).

TDS

• IP.009.ENG_BETON_CONTACT_TDS_ENG.pdf

SDS

• BETON-CONTACT_DEKA_BOYA_SDS_326126_Ver.3.0EN.pdf