Effects Paints
Effects Paints
APPLICATION AREA
Effect Wind can be used as an interior coating for walls, ceilings, rough concrete, wooden surfaces, as well as both new and previously painted surfaces.
-Effect Wind imparts a distinctive character to application surfaces with its unique grain texture and two-dimensional pearl effects.
-By accentuating the grain structure within the product, it opens the door to a variety of creative applications.
-Its high vapor permeability allows surfaces to release steam and breathe.
-Being water-based, it has no harm to human health or the environment.
– Effect Wind enhances the ambiance of application environments with a pleasant fragrance through its perfumed feature.
COLORS
Effect Wind is a decorative water-based paint based on acrylic emulsion, designed for interior spaces. It is distinguished by its unique grain structure and captivating two-dimensional pearlescent effects.
ALL COLORS
After removing all kinds of dirt, grease, bloated paint and dust from the application surface, the surface defects should be corrected with San Deco Acrylic Putty Interior and undercoated with San Deco Uniprimer.
Effect Wind Undercoat Application:
-Choose the Effect Wind Undercoat based on the color chart.
-Thin the selected Effect Wind Undercoat with 5-10% clean water.
-Apply the undercoat with 2 layers using a roller or brush.
-Allow 4-5 hours of drying time between each coat.
Effect Wind Application:
-After the Effect Wind Undercoat has dried, proceed with the application of Effect Wind.
-Use a special application tool consisting of dual-headed brushes.
-Dip the dual-headed brushes into two different colors of Effect Wind.
-Apply the product to the wall in all directions without overlapping the two colors, using alternative brush strokes.
-Before the product starts to dry, use a wooden brush to spread the grain particles by applying cross touches.
Environmental Conditions:
-Ensure that the application environment maintains a temperature range of +5°C to +35°C during and within 24 hours after the application.
For optimal results, allow 4-5 hours for the paint to become touch dry, and a full 24 hours for it to completely dry under standard environmental conditions at 23°C.
For a single coat application, the coverage of the paint depends on factors such as surface smoothness, porosity, and the chosen application methods:
